Town & Country Van V6-201 3.3L VIN R SMFI (1990)
Front Door Window Motor: Service and Repair
Power Window Regulator Assembly
REMOVAL
1.
Remove trim panel and door liner. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
2.
Remove the front door glass. See: Window Glass/Front Door Window Glass/Service and Repair
3.
Remove the power window regulator assembly. See: Window Regulator/Service and Repair/Power Window Regulator Replacement
4.
Drill out the two (2) rivets mounting the power window lift motor to the window regulator.
5.
Remove the power window lift motor off of the regulator.
INSTALLATION
1.
Position the power window lift motor onto the power window regulator and install two (2) 1/4-20 X 1/2 screws in place of the rivets that were
drilled out for removal. Torque the mounting screws to 90 lb-ft (11 Nm).
2.
Install the power window regulator assembly. See: Window Regulator/Service and Repair/Power Window Regulator Replacement
3.
Install the front door glass. See: Window Glass/Front Door Window Glass/Service and Repair
4.
Install the door liner and door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
