Town & Country Van V6-229 3.8L VIN L MFI (1995)
Power Door Lock Actuator: Service and Repair
Sliding Door Power Lock Motor
REMOVAL
1. Remove sliding door trim panel.
2. Remove latch/lock control.
3. Remove screws holding power door lock motor to latch/lock control.
4. Separate power lock motor from control.
INSTALLATION
1. Place power door lock motor in position on latch/lock control.
2. Install screws to hold power lock motor to control.
3. Install latch/lock control.
4. Verify power door lock operation.
5. Install sliding door trim panel.