Town & Country Van V6-229 3.8L VIN L MFI (1995)
Radiator: Service and Repair
1. Disconnect battery ground cable, then drain cooling system.
2. Remove hose clamps and hoses from radiator, then remove coolant reserve tank tube.
3. Remove automatic transmission hoses and auxiliary oil cooler, if equipped.
4. Disconnect fan motor electrical connector, then remove fan and support assembly.
5. Remove upper shroud fasteners, then lift shroud up and out of bottom attaching clips.
6. Remove front grille, then remove air conditioning condenser fasteners and separate condenser from radiator.
7. Remove upper radiator mounting screws, then disconnect engine block heater wire, if equipped.
8. Lift radiator from engine compartment being careful not to damage cooling fins or water tubes.
9. Reverse procedure to install. Tighten to specifications.
