Town & Country Van V6-229 3.8L VIN L MFI (1995)
2. Remove two right engine mount insulator vertical bolts from frame rail and loosen horizontal bolt. Do not remove large nut at end of core, Fig.
4.
3. Support transaxle with suitable jack.
4. Remove vertical and horizontal bolts from engine side bracket, then remove mount assembly.
5. Reverse procedure to install. Tighten to specifications.
REAR
1. Raise and support vehicle, then remove left front wheel.
2. Support transmission with transmission jack.
3. Remove insulator through bolt from mount and rear suspension crossmember.
Fig. 5 Rear Engine Mount Replacement
4. Remove four transmission mount bolts and the mount, Fig. 5.
5. Reverse procedure to install. Torque through bolt to 55 ft. lbs.