Town & Country Van V6-229 3.8L VIN L MFI (1995)
Fig. 47 Installation Of Crankshaft Front Oil Seal
7. Install crankshaft oil seal Fig. 47.
Fig. 48 Installation Of Crankshaft Pulley
8. Install crankshaft pulley Fig. 48.
9. Install engine bracket Fig. 44 torque screws to 54 Nm (40 ft.lbs.).
10. Install idler pulley on engine bracket.
11. Install cam sensor.
12. Install A/C compressor mounting bracket.
13. Install A/C compressor.
14. Install drive belt. Refer to Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair for installation procedure.
15. Install inner splash shield and wheel.
16. Install oil pump pick-up and oil pan and transmission inspection cover if removed.
17. Install engine mount.
18. Fill crankcase with oil to proper level.
19. Fill cooling system. Refer to Cooling System/Service and Repair for procedure.
20. Connect battery