Town & Country Van V6-229 3.8L VIN L MFI (1995)
Exhaust Manifold: Service and Repair
REMOVAL
1. Raise vehicle and disconnect exhaust pipe from rear (cowl side) exhaust manifold at articulated joint.
Fig. 16 EGR Tube, Heated Oxygen Sensor And Alternator/Power Steering Strut
2. Separate EGR tube from rear manifold and disconnect Heated Oxygen Sensor lead wire.
3. Remove Alternator/Power Steering Support Strut.
4. Remove bolts attaching cross-over pipe to manifold.
5. Remove bolts attaching rear manifold to cylinder head and remove manifold.
Fig. 17 Heat Shield
6. Lower vehicle and remove screws attaching front heat shield to front manifold.
Fig. 18 Crossover Pipe
7. Remove bolts fastening crossover pipe to front exhaust manifold and nuts fastening manifold to cylinder head. Remove assemblies.