Town & Country Van V6-229 3.8L VIN L MFI (1995)
Condenser HVAC: Service and Repair
REMOVAL
WARNING: The refrigeration system must be completely empty before proceeding with this operation.
NOTE: Special effort must be used to keep all R-134a system components moisture-free. Moisture in the oil is very difficult to remove and will
cause a reliability problem with the compressor.
1. Disconnect condenser to drier line at condenser side.
2. Remove radiator fan and shroud assembly.
3. Remove condenser outlet to radiator bracket.
4. Remove grill assembly.
5. Remove core support center brace.
6. Remove auxiliary transmission oil cooler, if equipped.
7. Remove right side headlamp assembly.
8. Remove core support plastic panel.
9. Remove condenser mounting bolts.
10. Remove condenser from vehicle.
INSTALLATION
1. To install, replace all 0-rings and gaskets, coat all sealing surfaces with approved wax-free refrigerant oil. Then reverse the preceding operation.
2. Evacuate and charge system.