chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

A/C Heater Control|Page 7954 > < Actuator Calibration/Diagnostics and Cool-down Test|Page 7951
Page 1
background image

Control Assembly: Service and Repair
A/C Heater Control

A/C AND HEATER CONTROL / BLOWER SWITCH

REMOVAL

(1) Remove the Center Instrument Panel Cluster Bezel.

(2) Remove cigar lighter element.

(3) Remove two screws and pull control assembly rearward. Reach behind control and disconnect the wiring harnesses, vacuum lines and temperature

control cable (Fig. 1O) Remove switch.

(4) For installation reverse above procedures.

A/C Heater Control|Page 7954 > < Actuator Calibration/Diagnostics and Cool-down Test|Page 7951