Town & Country Van V6-229 3.8L VIN L MFI (1995)
Rollover Valve: Service and Repair
WARNING: The fuel system is under constant pressure, even when the engine is OFF. Always release fuel pressure before servicing any fuel
system component.
Fuel Tank Assembly
Pressure Relief/Roll Over Valve
REMOVAL
1. Release fuel system pressure.
2. Remove fuel tank.
3. Slide the blade of a screwdriver between the rubber mounting grommet and the fuel tank, making sure not to slide the screwdriver between the
roll-over valve and grommet. Use a second screwdriver to brace the first and pry the roll-over valve out of the tank.
4. Remove the grommet from the valve, and make sure there is no damage or wear evident on the grommet. If grommet is worn it must be replaced.
