Town & Country Van V6-229 3.8L VIN L MFI (1995)
Ignition Switch: Service and Repair
1. On models with tilt column, remove tilt lever.
2. On all models, remove three upper and lower cover attaching screws, then the covers.
Fig. 6 Ignition Lock & Switch Removal
3. Remove three ignition switch attaching screws with tamper proof Torx bit Snap-On tool No. TTXR20A2, or equivalent, then carefully pull switch
away from column.
4. Disconnect and remove ignition switch wiring connector.
5. Remove Lock cylinder from ignition switch as follows:
a. Insert key and place ignition switch in Lock position.