Town & Country Van V6-229 3.8L VIN L MFI (1995)
Steering Gear: Service and Repair
AWD
1. Remove steering column as described in Steering Column Replacement.
2. Remove tie rod ends from steering knuckle using suitable puller.
Fig. 30 Bridge Assembly (AWD)
3. Remove two bolts and two nuts attaching bridge assembly to crossmember. Gain access to bolts through holes in top of bridge assembly.
4. Remove crossmember to frame rail attaching bolts. Using a suitable jack, lower and suspend crossmember from lower control arm. Do not remove
crossmember from vehicle.
5. Disconnect power steering pump, pressure and return lines from steering gear.
6. Remove power steering hose to crossmember bracket.
