chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Heater-A/C Control Lamp Replacement|Page 9023 > < Actuator Calibration/Diagnostics and Cool-down Test|Page 9020
Page 1
background image

Control Assembly: Service and Repair
Heater-A/C Control Lamp Replacement

HVAC Control Lamps

REMOVAL

1. Remove radio bezel and HVAC Control.
2. Remove rear cover from HVAC control.
3. Rotate bulb socket counter clockwise one quarter turn.
4. Pull bulb socket from HVAC.

INSTALLATION

1. Push bulb socket into HVAC.
2. Rotate bulb socket clockwise one quarter turn.
3. Install rear cover from HVAC control.
4. Install radio bezel and HVAC Control.

Heater-A/C Control Lamp Replacement|Page 9023 > < Actuator Calibration/Diagnostics and Cool-down Test|Page 9020