Town & Country Van 2WD V6-201 3.3L VIN R MFI (1996)
Glove Box Lamp: Description and Operation
CIRCUIT OPERATION
Power for the glove box lamp is supplied on circuit F41. This circuit is HOT at all times and protected by 15 Amp fuse located in cavity 11 of the
Power Distribution Center (PDC).
When the switch internal to the lamp CLOSES, a ground path is completed through the lamp to circuit M20. This circuit connects from the lamp
back to the Body Control Module (BCM).
Internal to the BCM a ground path is completed to a body ground.
