Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Whenever a reference exists to another sheet or figure, find the corresponding diagram using the Group Index, Diagrams By Sheet Number, or
Diagrams By Figure Number. The reference number for the subsequent diagram will match a listed group shown.
Connector and Splice Identification
The connector and Splice numbering used in the vehicle has a letter prefix to identity what harness the connector/splice is located in. A list of these letter
designations follows:
-
B - Body or EDW harness
-
C - Dome harness
-
D - Door harness
-
E - Engine harness
-
F - Fuel rail harness
-
J - Jumper harness
-
L - Liftgate harness
-
P - Instrument panel harness
-
S - Seat harness
-
T - Trailer tow harness
When looking at a splice reference the alpha code for what harness the splice is located in will come first, then an S to indicate a splice, and finally the
splice number. An example of this would be ESO2.
-
E - Indicates splice is in the engine harness
-
S - Indicates a splice
- 02 - Indicates what splice it is in harness
Wire Color Codes
Wire Color Code Identification
Wire Color Code Chart