Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Cruise Control Switch: Service and Repair
Speed Control Switches
REMOVAL
1. Release hood latch and open hood.
2. Disconnect battery negative cable.
3. Remove airbag/horn pad from steering wheel, refer to Air Bag for proper procedures.
4. Disconnect wire connector from horn switch, airbag, and speed control switches.
5. Remove screws holding speed control switch to airbag/horn pad.
6. Separate speed control switch from airbag/horn pad.
INSTALLATION
Reverse the preceding operation.