Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
9. Depress heater core retaining clips.
Accelerator Pedal
10. Pull up on accelerator pedal and slide heater core past.
11. Depress brake pedal and remove heater core from HVAC housing.
INSTALLATION
For installation, reverse the above procedures. Install screws to retain heater core in housing. Replace heater core tube inlet 0-rings. Tighten heater
core tube retaining plate to 2 to 4 NM (18 to 36 in. lbs.) torque.