Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
4. Install Socket, Strut Nut, Special Tool 6864 on the Strut shaft retaining nut. Then install a 10 mm socket on the hex of the strut damper shaft. While
holding strut shaft from turning, remove the strut shaft retaining nut.
5. Remove the upper strut mount from the strut assembly.
6. Release the coil spring from the spring compressor. Then remove the spring compressor from the coil spring.
7. Remove the upper spring seat and the pivot bearing as an assembly from the coil spring. Then remove the coil spring from the strut assembly. Mark
left and right springs for installation back on correct side of vehicle.