Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Wiper Motor: Service and Repair
Replacement
Wiper Motor Connector
REMOVAL
1. Remove wiper unit from vehicle.
2. Remove wiper linkage and motor mount plate from wiper unit.
3. Disconnect wire connectors from back of wiper motor.
4. Remove wiper linkage from motor crank. Do NOT remove crank from motor.
Wiper Motor Crank
Wiper Motor
5. Remove bolts holding wiper motor to mount plate and remove motor.
INSTALLATION
1. Place wiper unit on a suitable work surface.