Town & Country Van AWD V6-201 3.3L VIN R FI (1991)
10. Remove hub and bearing assembly. Replacement of the grease seal is recommended whenever this service is performed.
Installation
1. Install new hub and bearing assembly and tighten screws in a criss-cross pattern to 45 ft.lbs. (65 Nm.).
CAUTION: Knuckle and bearing mounting surfaces must be smooth and completely free of foreign material or nicks.
2. Position new seal in recess and assemble installer Tool C-4698 tool is provided with a handle and dual purpose drive head for installing seal into
knuckle and (head reversed) for installing wear sleeve into C/V joint housing).
3. Assemble tool and install seal.
CAUTION: During any service procedures where knuckle and driveshaft are separated, thoroughly clean seal and wear sleeve and relubricate BOTH
components.