Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Speed Sensor Cable Connection To Vehicle Wiring Harness
3. Remove grommet from floor pan of vehicle and unplug speed sensor cable connector from vehicle wiring harness.
CAUTION: When removing rear wheel speed sensor cable from routing clips on rear brake flex hose, be sure not to damage the routing clips.
Routing clips are molded onto the hose and will require replacement of the brake flex hose if damaged during removal of the speed sensor cable.
Speed Sensor Cable Attachment To Brake Flex Hose
4. Carefully remove the speed sensor cable from the rear brake flex hose routing clips.
Rear Speed Sensor Routing Brackets And Clips
5. Remove the rear wheel speed sensor cable/ brake tube routing clips. Then un-clip the speed sensor cable from the routing clips on rear brake tube.
CAUTION: If the speed sensor has seized, due to corrosion, do not use pliers on speed sensor head in a attempt to remove it. Use a hammer and
a punch and tap edge of sensor, rocking the sensor from side to side until free.
