Voyager L4-2.4L VIN B (2001)
Coolant Reservoir: Service and Repair
REMOVAL
1. Raise the vehicle on hoist.
2. Remove the lower attaching screws.
3. Lower the vehicle.
4. Remove the upper attaching screw.
5. Disconnect recovery hose from container.
6. Remove the recovery container.
INSTALLATION
1. Connect the recovery hose to container.
2. Position the recovery container on the frame rail.
3. Install the upper attaching screw and tighten to 7 Nm (60 inch lbs.).
4. Raise the vehicle on hoist.
5. Install the lower attaching screws and tighten to 8.5 Nm (75 inch lbs.).
6. Lower the vehicle.
7. Add coolant to container as necessary.