chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Fan Shroud > < Engine Coolant Temperature (ECT) Sensor <--> [Coolant Temperature Sensor/Switch (For Computer)]|Specifications|Page 1888

Voyager L4-2.4L VIN B (2001)

Page 1
background image

Engine Coolant Temperature (ECT) Sensor: Service and Repair

REMOVAL 

WARNING:  HOT, PRESSURIZED COOLANT CAN CAUSE INJURY BY SCALDING. COOLING SYSTEM MUST BE PARTIALLY
DRAINED BEFORE REMOVING THE COOLANT TEMPERATURE SENSOR. 

1. Drain the cooling system below thermostat level. 
2. Disconnect coolant temperature sensor electrical connector.
3. Remove coolant temperature sensor.

INSTALLATION 

1. Install coolant temperature sensor. Tighten sensor to 7 Nm (60 inch lbs.).
2. Connect electrical connector to sensor.
3. Fill cooling system.

Fan Shroud > < Engine Coolant Temperature (ECT) Sensor <--> [Coolant Temperature Sensor/Switch (For Computer)]|Specifications|Page 1888