Voyager L4-2.4L VIN B (2001)
Camshaft Bearing: Service and Repair
Position camshafts on cylinder head bearing journals. Install right and left camshaft bearing caps No. 2 - 5 and right No. 6. Tighten M6 fasteners to 12
Nm (105 in. lbs.) in sequence shown in (Fig. 28).
Apply Mopar Gasket Maker to No. 1 and No. 6 bearing caps (Fig. 29). Install bearing caps and tighten M8 fasteners to 28 Nm (250 in. lbs.).
NOTE: Bearing end caps must be installed before seals can be installed.