Voyager L4-2.4L VIN B (2001)
Camshaft Oil Seal: Service and Repair
REMOVAL
1. Remove timing belt.
2. Hold each camshaft sprocket with Special Tool 6847 while removing center bolt (Fig. 20).
3. Remove camshaft sprockets.
4. Remove rear timing belt cover.
5. Remove camshaft seal using Special Tool C-4679-A (Fig. 21).
CAUTION: Do not nick shaft seal surface or seal bore.
INSTALLATION
1. Shaft seal surface must be free of varnish, dirt or nicks. Polish with 400 grit paper if necessary.
