Voyager L4-2.4L VIN B (2001)
2. Set camshafts timing marks so that the exhaust camshaft sprocket is a 1/2 notch below the intake camshaft sprocket (Fig. 121).
CAUTION: Ensure that the arrows on both camshaft sprockets are facing up.
3. Install timing belt. Starting at the crankshaft, go around the water pump sprocket, idler pulley, camshaft sprockets and then around the tensioner
(Fig. 122).
4. Move the exhaust camshaft sprocket counterclockwise (Fig. 122) to align marks and take up belt slack.
NOTE: A new tensioner Is hold in the wound position by a pull pin.
5. Remove the pull pin or Allen wrench from the belt tensioner.
