Voyager L4-2.4L VIN B (2001)
Throttle Cable/Linkage: Specifications
Throttle Cable Bracket Plastic Manifold ...............................................................................................................................................5.7 Nm (50 In. Lbs.).
Throttle Cable Bracket Aluminum Manifold .....................................................................................................................................11.9 Nm (105 In. Lbs.).
The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the
specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair screws
available for repair. They require a higher torque than the original screws..
