Voyager L4-2.4L VIN B (2001)
Wiper Switch: Testing and Inspection
Failed Park Switch Test
If the wiper park switch has failed the windshield wipers will operate as follows:
-
SWITCH OFF - Wipers stop in current location regardless of the park signal.
-
INTERMITTENT MODE - Wipers operate at low speed for one or more extra wipes or continuously.
-
LOW SPEED - Wipers operate at low speed.
-
HIGH SPEED - Wipers operate at high speed.
-
PULSE WIPE - Wipers will not operate.
-
WIPE AFTER WASH - Wipers operate at low speed in any mode setting. Wipers operate only while wash button is depressed with switch in OFF
mode, wipers stop in mid-cycle when button is released.
The windshield wiper park switch and circuit is monitored by the BCM. The park switch and circuit can be tested using the table.