Voyager V6-3.0L VIN 3 (2000)
Seat Belt: Service and Repair
Seat Belt - Second Right Row Outboard SWB
SEAT BELT SECOND ROW OUTBOARD - SWB REMOVAL
1. Remove second row seat from vehicle. See: Body and Frame/Seats/Service and Repair
2. Slide lower anchor cover from over the anchor shoulder-nut.
3. Remove lower anchor shoulder-nut.
4. Remove lower anchor from wheelhouse Seat Belt Second Row Outboard - SWB
5. Remove D-pillar trim panel.
6. Route seat belt webbing and turning loop through access hole in quarter trim.
7. Remove bolts attaching seat belt guide loop to inner quarter panel.
8. Remove anchor bolt attaching retractor to inner quarter panel.
9. Remove second row seat belt retractor from vehicle Seat Belt Second Row Outboard - SWB
INSTALLATION
1. Place second row seat belt retractor into position.
2. Install anchor bolt attaching retractor to inner quarter panel. Tighten all seat belts to 39 N.m (29 ft. lbs.) torque.
3. Install bolts attaching seat belt guide loop to inner quarter panel.
4. Route seat belt webbing and turning loop through access hole in quarter trim.
5. Install D-pillar trim panel.
6. Install lower anchor to the wheelhouse.
7. Install lower anchor shoulder-nut. Tighten all seat belts to 39 N.m (29 ft. lbs.) torque.
8. Slide lower anchor cover over the anchor shoulder-nut.
9. Jnstall second row seat into position. See: Body and Frame/Seats/Service and Repair