Voyager V6-3.0L VIN 3 (2000)
Wiper Motor Linkage: Service and Repair
Wiper Linkage Replacement
REMOVAL
1. Remove the windshield wiper unit from vehicle.
2. Place the wiper unit on a suitable work surface.
3. Remove nuts holding the cowl cover brackets to the wiper unit.
4. Remove cowl cover brackets from the wiper unit.
Wiper Linkage
5. Remove nuts holding linkage and motor mount plate to the wiper unit.
6. Remove the wiper linkage from the wiper unit.
Wiper Motor Connector
7. Disconnect the wire connectors from back of the wiper motor.
INSTALLATION
For installation, reverse the above procedure.