Hydraulic Control Assembly - ABS Solenoid - Service and Repair
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Modulator Bleeder Valve
Removal Procedure
1. Place a shop cloth or suitable container below the bleeder valve to catch escaping brake fluid.
2. Unscrew and remove the bleeder valve from the hydraulic modulator. This illustration shows the left-side bleeder valve. There is another bleeder
valve on the right side.
Installation Procedure
1. Install the bleeder valve into the hydraulic modulator. Do not tighten fully.
2. Bleed the brake system. See: Brake Bleeding