Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
3. Disconnect the Antilock Brake System (ABS) solenoid and the motor pack electrical connectors.
NOTICE: Place a shop cloth beneath the hydraulic modulator brake pipes to prevent brake fluid from contaminating the motor pack or the
electrical connectors. Plug the brake pipes to prevent loss or contamination of brake fluid.
4. Disconnect the brake pipes from the hydraulic modulator.
5. Remove the nuts securing the hydraulic modulator/ motor pack assembly to its mount.
6. Remove the hydraulic modulator/motor pack assembly from the vehicle.
Installation Procedure
1. Install the hydraulic modulator/motor pack assembly to the vehicle. Install the nuts.
Tighten
Tighten the hydraulic modulator/motor pack assembly nuts to 5 Nm (44 inch lbs.).
