Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
10. Bleed the hydraulic modulator:
10.1 Attach a clear plastic bleeder hose to the left-side bleeder valve on the hydraulic modulator. Submerge the other end of the bleeder hose in a
clean container partially filled with brake fluid.
10.2 Slowly open the left-side bleeder valve 1/2 to 3/4 turn.
10.3 Have an assistant press the brake pedal and hold it down until the brake fluid begins to flow.
10.4 Close the bleeder valve and have the assistant release the brake pedal. Repeat Steps 10.2 and 10.3 until no air bubbles are present.
Tighten
Tighten the bleeder valve to 9 Nm (80 inch lbs.).
10.5 Repeat the procedure for the right-side bleeder valve.
11. Remove the master cylinder reservoir cap.
12. Inspect the brake fluid level; add clean DOT 3 or equivalent hydraulic brake fluid if needed.
13. Install the master cylinder reservoir cap.
