Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
2. Fill the master cylinder reservoir with master cylinder fluid. Keep the master cylinder at least one-half full of fluid during the bleeding operation.
3. Disconnect the front brake lines at the master cylinder.
4. Allow the master cylinder fluid to fill the master cylinder until it begins to flow from the front pipe connector port.
5. Connect the front brake lines to the master cylinder.
Tighten
Tighten the brake lines to 16 Nm (12 ft. lbs.).
6. Slowly push and hold the brake pedal one time.
