Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Brake Shoe: Testing and Inspection
LINING INSPECTION
1. Raise and suitably support the vehicle.
2. Remove the wheel.
3. Release the parking brake.
4. Remove the drum. See: Brake Drum
5. Measure the lining thickness. The minimum lining thickness is 0.5 mm (0.02 inch).
WARNING: To avoid injury when servicing brake parts, do not create dust by grinding or sanding the brake linings or by cleaning the
wheel brake parts with a dry brush or with compressed air.
IMPORTANT: Replace the shoe and lining assembly in axle sets only.
6. Install the drum. See: Brake Drum
7. Install the wheel.
8. Lower the vehicle.