Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
8. Attach the bleeder hose to the bleeder valve. Submerge the opposite end of the hose in a clean container partially filled with master cylinder fluid.
9. Open the bleeder valve one-half to three-fourths of a turn and allow the fluid to flow until no air is seen in the fluid.
NOTICE: After the bleeding operation, the brake reservoir may be pressurized. While disconnecting the bleeder hose or the unthreaded adapter
cap, cover the cap and the connection with a shop towel to protect painted surfaces from contact with the master cylinder fluid.
10. Inspect the brake pedal for sponginess. Repeat the entire bleeding procedure to correct this condition.
MANUAL BLEEDING THE BRAKES
1. Remove the booster reserve by applying the brakes several times with the engine OFF until all the reserve is depleted.
IMPORTANT: If the master cylinder is known or suspected to have air in the bore, it must be bled before any wheel cylinder or caliper is bled.
