Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
10. Gently tap out the wheel cylinder from the backing plate, using care not to damage the bleeder valve or its cap.
Installation Procedure
1. Install the wheel cylinder to the backing plate with the wheel cylinder bolt.
Tighten
Tighten the wheel cylinder-to-backing plate bolt to 8 Nm (71 inch lbs.).
2. Connect the brake line to the wheel cylinder.
Tighten
Tighten the brake line to 16 Nm (12 ft. lbs.).
3. Install the shoe and lining, and the brake drum. See: Drum Brake System/Brake Shoe
4. Bleed the brakes. See: Brake Bleeding