Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Vacuum Brake Booster: Service and Repair
Power Booster Assembly
Removal Procedure
1. Disconnect the electrical connector from the reservoir cap.
2. For vehicles with a manual transaxle, disconnect the clip on the clutch hose connection to the master cylinder.
3. Plug the clutch hose and the master cylinder so that the fluid does not escape.
4. Remove the master cylinder attaching nuts.
5. Push the master cylinder forward slightly and move it out of the way. Do not disconnect the brake lines.
6. Remove and discard the booster housing seal.
