Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
1. Check the pushrod and the adjustment sleeve for damage and proper fit.
2. Install the hex nut and the adjustment sleeve on the booster.
Tighten
Tighten the booster pushrod hex nut and the adjustment sleeve to 18 Nm (13 ft. lbs.).
3. Insert the pushrod in the adjustment sleeve and mount the retainer.
4. Measure the distance from the booster to the center of the fork bin bore.
IMPORTANT: This measurement should be 278.5 mm (10 inches).