Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
8. Connect the master cylinder to the booster and install a new booster housing seal.
Tighten
Tighten the master cylinder attaching nuts to 18 Nm (13 ft. lbs.).
9. Install the new vacuum hose to the booster (DOHC engine connection shown).
10. Install new hose clamps on the vacuum hose.
11. Install the pushrod pin to the brake pedal bracket assembly and connect the clip and the spring. See: Brake Pedal Assy
12. Install the brake lamp switch.