Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
13. Remove the left upper radiator retaining bolt.
14. Remove the left upper radiator retaining bracket.
15. Remove the right upper radiator retaining bolt.
16. Remove the right upper radiator retaining bracket.
17. Remove the radiator from the vehicle.
Important: The radiator still contains a substantial amount of coolant. Drain the remainder of the coolant from the radiator into a drain pan.
Installation Procedure
1. If installing a new radiator, remove the transaxle cooler pipes from the old radiator and install them onto the left tank of the new radiator.
2. Install the upper transaxle cooler pipe to the radiator and secure the pipe with a pipe bolt.
Tighten the upper transaxle cooler pipe bolt to 12 Nm (106 inch lbs.).
3. Install the pipe holder as it was in the old radiator.
4. Install the lower transaxle cooler pipe to the radiator and secure the pipe with a pipe bolt.
Tighten the lower transaxle cooler pipe bolt to 12 Nm (106 inch lbs.).
