Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Radiator Cooling Fan Motor: Service and Repair
Electric Cooling Fan - Auxiliary
ELECTRIC COOLING FAN - AUXILIARY
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the cooling fan electrical connector.
3. Remove the fan shroud mounting bolts.
4. Lift the fan shroud assembly upward, and remove the fan shroud assembly from the vehicle.
5. Remove the fan motor nuts that secure the fan motor to the shroud.
6. Remove the fan motor from the shroud.
7. Remove the fan retaining nut which secures the fan to the motor.
Installation Procedure
Caution: If a fan blade is bent or damaged in any way, no attempt should be made to repair or reuse the damaged part. A bent or damaged fan
assembly must be replaced with a new fan assembly. It is essential that fan assemblies remain in proper balance. A fan assembly that is not in proper
balance can fail and fly apart during use, creating an extremely dangerous condition. Proper balance cannot be assured on a fan assembly that has been
bent or damaged
1. Install the fan to the motor.
