Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
3. Install the intake camshaft caps in their original positions.
4. Install the intake camshaft cap bolts.
5. Install the exhaust camshaft.
6. Install the exhaust camshaft caps in their original positions.
7. Install the exhaust camshaft cap bolts.
8. Tighten the camshaft cap bolts gradually and in the sequence shown for each camshaft cap.
Tighten the camshaft cap bolts to 16 Nm (12 ft. lbs.).
9. Measure the intake camshaft end play and the exhaust camshaft end play. Refer to Camshaft, Engine; Specifications.
10. Install the intake camshaft gear.
11. While holding the intake camshaft firmly in place, install the intake camshaft gear bolt.
Tighten the intake camshaft gear bolt to 67.5 Nm (49 ft. lbs.).
12. Install the exhaust camshaft gear.