Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
5. Rotate the coolant pump clockwise until the adjust arm pointer of the timing belt automatic tensioner is aligned to the notch in the timing belt
automatic tensioner bracket.
6. Tighten the coolant pump retaining bolts.
7. Rotate the crankshaft two full turns clockwise using the crankshaft pulley bolt.
8. Loosen the coolant pump retaining bolts.
9. Rotate the coolant pump until the adjust arm pointer of the timing belt automatic tensioner is aligned with the pointer on the timing belt automatic
tensioner bracket.
10. Tighten the coolant pump retaining bolts.
Tighten the coolant pump retaining bolts to 10 Nm (89 inch lbs.).
11. Remove the crankshaft pulley bolt.
12. Install the power steering pump mounting bolts, if equipped.
