Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Tighten the power steering pump mounting bolts to 25 Nm (18 ft. lbs.).
34. Install the upper and lower front timing belt cover.
35. Install the upper and lower front timing belt cover bolts.
Tighten the upper and lower front timing belt cover bolts to 10 Nm (89 inch lbs.).
36. Install the crankshaft pulley.
37. Install the crankshaft pulley bolt.
Tighten the crankshaft pulley bolt to 95 Nm (70 ft. lbs.) using a torque wrench. Using the angular torque gauge KM-470-B, tighten the crankshaft
pulley bolt 30 degrees plus 15 degrees.
38. Install the power steering pump pulley, if equipped.
39. Install the power steering pump pulley bolts, if equipped.
Tighten the power steering pump pulley bolts to 25 Nm (18 ft. lbs.).
40. Install the alternator drive belt.
41. Install the A/C compressor drive belt, if equipped.
42. Install the right front splash shield.
43. Install the right front wheel.
44. Install the air filter housing.
