Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Compressor Clutch Hub: Service and Repair
Tools Required
J-33013-B Hub and Drive Plate Remover/Installer
J-33022 Shaft Nut Socket
J-33027 Clutch Hub Holding Tool
J-42428 Compressor Holding Fixture
Disassembly Procedure
1. Remove the compressor.
2. Install the compressor holding fixture J-42428 to the compressor and hold the compressor holding fixture using a bench vise.
3. Use the clutch hub holding tool J-33027 to keep the clutch drive plate and hub assembly from turning. Remove the shaft nut.
4. Thread the hub and drive plate remover J-33013-B into the hub. Hold the body of the remover with a wrench and turn the center screw into the
remover body to remove the clutch drive plate and hub assembly.
5. Remove the clutch hub key. Retain the key for assembly.
Assembly Procedure