Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
1. Clean the O-ring surface areas of dirt or contamination.
2. Install new O-rings on the evaporator tubes.
3. Install a new expansion valve onto the evaporator tubes.
4. Install the expansion valve retaining bolts.
Tighten
Tighten the expansion valve retaining bolts to 12 Nm (106 lb.in).
5. Install the evaporator into the heater/air distribution case.
6. Install the heater/air distribution case assembly.
7. Install the instrument panel carrier assembly.
8. Connect the negative battery cable.
9. Evacuate and recharge the system.
