Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Ash Tray Lamp: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the audio system trim panel.
3. Remove the screws and the cupholder.
4. Remove the bulb from the ashtray housing.
Installation Procedure
1. Install the bulb into the ashtray housing.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the cupholder with the screws.
Tighten
Tighten the cupholder screws to 2 Nm (18 lb.in).
3. Install the audio system trim panel.
4. Connect the negative battery cable.
