Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
License Plate Lamp: Service and Repair
(Typical)
Removal Procedure
1. Remove the screws.
2. Disconnect the electrical connector.
3. Remove the lamp assembly.
4. Remove the bulb.
Installation Procedure
1. Install a new bulb.
2. Connect the electrical connector.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
3. Install the lamp assembly with the screws.
Tighten
Tighten the license plate lamp screws to 1.5 Nm (13 lb.in).
