Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Tail Lamp: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the taillamp assembly screws.
3. Slide the taillamp assembly toward the hatch opening and remove it.
4. Remove the bulbs.
Installation Procedure
1. Install the bulbs.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the taillamp assembly with the screws.
Tighten
Tighten the taillamp assembly screws to 3 Nm (27 lb.in).
3. Connect the negative battery cable.