daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Turn Signals > < Diagram Information and Instructions|Page 4669
Page 1
background image

Trunk Lamp: Service and Repair

(Typical)

Removal Procedure

1. Disconnect the negative battery cable.
2. Gently pry the luggage compartment lamp off by inserting a flathead screwdriver into the recess on the edge of the lamp.
3. Disconnect the electrical connector.
4. Remove the bulb.

Installation Procedure

1. Install a new bulb.
2. Connect the electrical connector.
3. Insert the luggage compartment lamp into the recess and press the lens into place.
4. Connect the negative battery cable.

Turn Signals > < Diagram Information and Instructions|Page 4669